HPK 1100 / 50
At Greenbank Waste Solutions all of our Channel Balers are designed to make heavy duty bales for maximum payloads. The HPK 1100/50 Fully Automatic Baler is 2.4 metres in height with a feed opening of 1.6m by 1.05m. This specific baler can be used for a number of materials and requires a minimum wire consumption.
The HPK 11/50 offers a compaction force of 500 kN and requires 4 binding straps/wire pieces. The amount of space required to house this baler is 11.7m by 2.95m and it’s important to ensure this area is available. All bales are ergonomically sized to efficiently stack in containers and curtain-sided vehicles.
WxH (mm) 1600 x 1050
WxDxH (mm) N/A
Cardboard, Plastic, Paper
How loud is this machine?
HPK 1100 / 50
Constant material density
The compaction density of the material is kept constant by an automatic channel adjustment.
Minimum wire consumption
Achieved through the use of a push needle, automatic binding system
Guaranteed powerful performance
- The compact design and minimum wire consumption is achieved through the use of a push needle, automatic binding system
- The hydraulic central drive helps save energy thanks to its demand-controlled axial piston pump
- The compaction density of the material is kept constant by an automatic channel adjustment
|Drive power kW||30 /55|
|Length (L) mm||8550|
|Width (B) mm||1950|
|Space required mm||11700 x 2950|
|Dimension A mm||1510|
|Feeding opening mm||1600 x 1050|
|Channel cross-section mm||1100 x 700|
|Feeding volume, max m3||1.23|
|Compaction force kN||500|
|Specific compaction force kN / m2||650|
|Cycle time S||20 / 15|
|Number of binging straps/wires piece||4|
|Bale weight kg||550|
|Machine weight kg||12500 / 13200|
|Electrical power supply||3 L / N / PE; 400 V, 50 Hz|